H3C S7500 Series Ethernet Switches Command Manual

Command Manual – File System Management
H3C S7500 Series Ethernet Switches Chapter 1
File System Management Commands
1-9
Examples
# Display the content of the file test.txt.
<H3C> more test.txt
The file is for test only.
1.1.11 move
Syntax
move fileurl-source fileurl-dest
View
User view
Parameters
fileurl-source: Path and file name of the source file.
fileurl-dest: Path and file name of the target file.
Description
Use the move command to move a file to a specified directory. You can also assign a
new name for the file.
If the target file name specified is the same as that of an existing file in the destination
directory, the system prompts you for the confirmation to overwrite the existing file.
Examples
# Display the information about the files in flash:/ and flash:/hello.
<H3C> dir
Directory of flash:/
0 -rw- 4 Mar 09 2006 13:59:19 snmpboots
1 -rw- 16215134 Apr 04 2006 16:36:20 S7500.app
2 -rw- 553 Jan 21 2006 17:05:55 diaginfo.txt
3 -rw- 3906 Apr 04 2006 17:23:54 config.cfg
4 drw- - Apr 05 2006 10:53:23 hello
5 drw- - Apr 10 2005 19:07:59 dd
6 -rw- 11779 Apr 05 2006 10:23:03 test2.bak
7 drw- - Jan 25 2005 11:08:59 backup
31877 KB total (15935 KB free)
<H3C> dir flash:/hello/
Directory of flash:/hello/