H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Infomation Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Center Commands
1-2
Parameters
None
Description
Use the display info-center command to display the operation status of the
information center, the configuration of information channels, and the format of time
stamp.
If the number of the messages in the current log/trap buffer is less than the buffer size
specified by a user, this command is used to display the actual log/trap information.
Related commands: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, info-center trapbuffer,
info-center snmp channel, info-center timestamp.
Examples
# Display information about the information center.
<H3C> display info-center
Information Center:enabled
Log host:
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:2, channel number:4, channel name:logbuffer
dropped messages:0, overwritten messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwritten messages:0
Information timestamp setting:
log - date, trap - date, debug – boot
Table 1-1 Description on the fields of the display info-center command
Field Description
Information Center: Information center is enabled.
Log host:
Information about the log host, including its IP address,
name and number of information channel, language and
level