H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Infomation Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Center Commands
1-16
Module name Description
SC Server control module
SHELL User interface module
SNMP Simple network management protocol module
SOCKET Socket module
SSH Secure shell module
SYSM System management module
SYSMIB System MIB module
TAC Terminal access controller module
TELNET Telnet module
TFTPC TFTP client module
TUNNEL Packets transparent transmission module
UDPH UDP helper module
USERLOG User log module
VFS Virtual file system module
VLAN Virtual local area network module
VRRP VRRP (virtual router redundancy protocol) module
VTY VTY (virtual type terminal) module
default Default settings of all modules
default: Defaults the settings of all modules.
channel-number: Number of information channel to be used.
channel-name: Channel name, by default, the names of channels 0 to channel 9 are
console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7,
channel8, and channel9.
log: Specifies to output log information.
trap: Specifies to output trap information.
debug: Specifies to output debugging information.
level: Specifies an information severity level.
severity: Information severity. The information below this severity will not be output.
Information at different levels is as follows:
emergencies: Level 1 information, indicates that the system is not available.
alerts: Level 2 information, requiring immediate reaction.
critical: Level 3 information, critical information.