H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Infomation Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Center Commands
1-23
% Current terminal logging is off
1.1.21 terminal monitor
Syntax
terminal monitor
undo terminal monitor
View
User view
Parameters
none
Description
Use the terminal monitor command to enable the debugging/log/trap information
terminal display function.
Use the undo terminal monitor command to disable these functions.
By default, these functions are enabled for console users and terminal users.
This command only takes effect on the current terminal where the command is input.
The debugging/log/trap information can be output to the current terminal only when you
execute this command in user view. When the terminal monitor is disabled, no
debugging/log/trap information will be displayed in local terminal, which is equal to
having performed undo terminal debugging, undo terminal logging, and undo
terminal trapping commands. When the terminal monitor is enabled, you can use
terminal debugging / undo terminal debugging, terminal logging / undo terminal
logging and terminal trapping / undo terminal trapping respectively to enable or
disable the corresponding functions.
Examples
# Disable the terminal monitor function.
<H3C> undo terminal monitor
% Current terminal monitor is off
1.1.22 terminal trapping
Syntax
terminal trapping
undo terminal trapping