H3C S7500 Series Ethernet Switches Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Chapter 1 Basic System Configuration
and Debugging Commands
1-10
SRPG 1: uptime is 0 weeks,0 days,0 hours,23 minutes
H3C S7500 with 1 MPC8245 Processor
256M bytes SDRAM
32768K bytes Flash Memory
512K bytes NVRAM Memory
PCB Version : VER.B
BootROM Version : 530
CPLD Version : 004
Second CPLD Ver : 005
Software Version : S7506R-3135
Patch Version : None
LPU 1: uptime is 0 weeks,0 days,0 hours,21 minutes
H3C S7500 LPU with 1 MPC8241 Processor
128M bytes SDRAM
0K bytes Flash Memory
0K bytes NVRAM Memory
PCB Version : VER.B
BootROM Version : 510
CPLD Version : 002
Software Version : S7506R-3135
Patch Version : None
1.3 System Debugging Commands
1.3.1 debugging
Syntax
debugging { all [ timeout interval ] | module-name debugging-option }
undo debugging { all | module-name debugging-option }
View
User view
Parameters
all: Enables or disables all debugging.
timeout interval: Sets the timeout time for all debugging, in the range of 1 to 1,440 (in
minutes). After the setting, all debugging is valid in the specified period which starts
from the time when the debugging is enabled. After the period, all debugging will be
disabled.
module-name: Module name.
debugging-option: Debugging option.