H3C S7500 Series Ethernet Switches Command Manual

Command Manual – HWPing
H3C S7500 Series Ethernet Switches Chapter 1
HWPing Commands
1-6
The system automatically tests at intervals specified by this command, where the
argument interval is greater than 0.
Related commands: count.
Examples
# Set the automatic test interval of test group administrator-icmp to 10 seconds.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] hwping administrator icmp
[H3C-hwping-administrator-icmp] frequency 10
1.1.5 hwping
Syntax
hwping administrator-name operation-tag
undo hwping administrator-name operation-tag
View
System view
Parameters
administrator-name: Name of the administrator creating a HWPing test group, a string
of 1 to 32 characters.
operation-tag: Test operation tag, a string of 1 to 32 characters.
Description
Use the hwping command to create a HWPing test group and enter HWPing test group
view.
Use the undo hwping command to delete this test group.
Examples
# Create a HWPing test group, setting the administrator name to administrator and
the test operation tag to icmp.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] hwping administrator icmp
[H3C-hwping-administrator-icmp]