H3C S7500 Series Ethernet Switches Command Manual

Command Manual – IP Address-IP Performance-IPX
H3C S7500 Series Ethernet Switches Chapter 3
IPX Configuration Commands
3-5
Table 3-3 Description on the fields of the display ipx routing-table verbose
command
Field Description
Time
Route aging time; it is 0 for the direct and static routes, meaning they
never time out.
State
The state of the route. It can be active, inactive, or delete. Active
indicates that this route is an active route. Inactive indicates that this
route is an inactive route. Delete indicates that this route has been
deleted, but it is not released.
# View the IPX routing statistics.
<H3C> display ipx routing-table statistics
Routing tables:
Proto/State route active added deleted freed
Direct 1 1 2 1 1
Static 2 1 2 0 0
RIP 0 0 0 0 0
Default 0 0 0 0 0
Total 3 2 4 1 1
Table 3-4 Description on the fields of the display ipx routing-table statistics
command
Field Description
Proto/State Routing protocol
Route Number of routes, including active and inactive routes
Active Number of active routes
Added Number of added routes
Deleted Number of deleted, but not released routes
Freed Number of released routes
3.1.3 display ipx service-table
Syntax
display ipx service-table [ inactive | name name | network network | order
{ network | type } | type service-type ] [ verbose ]