H3C S7500 Series Ethernet Switches Command Manual

Command Manual – GVRP
H3C S7500 Series Ethernet Switches Chapter 1
GVRP Configuration Commands
1-5
Once a GARP entity starts up, it starts the LeaveAll timer, and sends out a LeaveALL
message after the timer times out, so that other GARP entities can re-register all the
attribute information on this entity. After that, the entity restarts the LeaveAll timer to
begin a new cycle.
Related commands: display garp timer.
Examples
# Set the GARP LeaveAll timer to 100 centiseconds.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] garp timer leaveall 100
1.1.5 reset garp statistics
Syntax
reset garp statistics [ interface interface-list ]
View
User view
Parameters
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index lists for this argument.
Description
Use the reset garp statistics command to clear the GARP statistics (such as the
information about the packets received/sent/discarded by GVRP/GMRP) on specified
or all ports.
Executing the reset garp statistics command without any parameter clears the GARP
statistics of all ports.
Related commands: display garp statistics.
Examples
# Clear GARP statistics of all ports.
<H3C> reset garp statistics