H3C S7500 Series Ethernet Switches Command Manual
Table Of Contents
- 00-1Cover.pdf
- 01-CLI Commands.pdf
- 02-Login Commands.pdf
- Chapter 1 Login Commands
- 1.1 Login Commands
- 1.1.1 authentication-mode
- 1.1.2 auto-execute command
- 1.1.3 databits
- 1.1.4 display user-interface
- 1.1.5 display users
- 1.1.6 flow-control
- 1.1.7 free user-interface
- 1.1.8 header
- 1.1.9 history-command max-size
- 1.1.10 idle-timeout
- 1.1.11 lock
- 1.1.12 modem
- 1.1.13 modem auto-answer
- 1.1.14 modem timer answer
- 1.1.15 parity
- 1.1.16 protocol inbound
- 1.1.17 screen-length
- 1.1.18 send
- 1.1.19 service-type
- 1.1.20 set authentication password
- 1.1.21 shell
- 1.1.22 speed
- 1.1.23 stopbits
- 1.1.24 sysname
- 1.1.25 telnet
- 1.1.26 user-interface
- 1.1.27 user privilege level
- 1.1 Login Commands
- Chapter 2 Commands for User Control
- Chapter 1 Login Commands
- 03-Configuration File Management Commands.pdf
- 04-VLAN Commands.pdf
- 05-Extended VLAN Application Commands.pdf
- 06-IP Address-IP Performance-IPX Commands.pdf
- Chapter 1 IP Address Configuration Commands
- Chapter 2 IP Performance Configuration Commands
- 2.1 IP Performance Configuration Commands
- 2.1.1 display fib
- 2.1.2 display icmp statistics
- 2.1.3 display ip socket
- 2.1.4 display ip statistics
- 2.1.5 display tcp statistics
- 2.1.6 display tcp status
- 2.1.7 display udp statistics
- 2.1.8 ip
- 2.1.9 ip forward-broadcast
- 2.1.10 reset ip statistics
- 2.1.11 reset tcp statistics
- 2.1.12 reset udp statistics
- 2.1.13 tcp timer fin-timeout
- 2.1.14 tcp timer syn-timeout
- 2.1.15 tcp window
- 2.1 IP Performance Configuration Commands
- Chapter 3 IPX Configuration Commands
- 3.1 IPX Configuration Commands
- 3.1.1 display ipx interface
- 3.1.2 display ipx routing-table
- 3.1.3 display ipx service-table
- 3.1.4 display ipx statistics
- 3.1.5 ipx enable
- 3.1.6 ipx encapsulation
- 3.1.7 ipx netbios-propagation
- 3.1.8 ipx network
- 3.1.9 ipx rip import-route static
- 3.1.10 ipx rip mtu
- 3.1.11 ipx rip multiplier
- 3.1.12 ipx rip timer update
- 3.1.13 ipx route load-balance-path
- 3.1.14 ipx route max-reserve-path
- 3.1.15 ipx route-static
- 3.1.16 ipx sap disable
- 3.1.17 ipx sap gns-disable-reply
- 3.1.18 ipx sap gns-load-balance
- 3.1.19 ipx sap max-reserve-servers
- 3.1.20 ipx sap mtu
- 3.1.21 ipx sap multiplier
- 3.1.22 ipx sap timer update
- 3.1.23 ipx service
- 3.1.24 ipx split-horizon
- 3.1.25 ipx tick
- 3.1.26 ipx update-change-only
- 3.1.27 reset ipx routing-table statistics protocol
- 3.1.28 reset ipx statistics
- 3.1 IPX Configuration Commands
- 07-GVRP Commands.pdf
- 08-QinQ Commands.pdf
- 09-Port Basic Configuration Commands.pdf
- Chapter 1 Port Basic Configuration Commands
- 1.1 Port Basic Configuration Commands
- 1.1.1 broadcast-suppression
- 1.1.2 copy configuration
- 1.1.3 description
- 1.1.4 display brief interface
- 1.1.5 display interface
- 1.1.6 display loopback-detection
- 1.1.7 display port
- 1.1.8 display transceiver-information interface
- 1.1.9 duplex
- 1.1.10 flow-control
- 1.1.11 flow-control enable
- 1.1.12 flow interval
- 1.1.13 hardspeedup
- 1.1.14 interface
- 1.1.15 jumboframe enable
- 1.1.16 loopback-detection enable
- 1.1.17 loopback-detection interval-time
- 1.1.18 mdi
- 1.1.19 multicast-suppression
- 1.1.20 reset counters interface
- 1.1.21 shutdown
- 1.1.22 speed
- 1.1.23 speedup
- 1.1.24 virtual-cable-test
- 1.1 Port Basic Configuration Commands
- Chapter 1 Port Basic Configuration Commands
- 10-Link Aggregation Commands.pdf
- Chapter 1 Link Aggregation Configuration Commands
- 1.1 Link Aggregation Configuration Commands
- 1.1.1 display lacp system-id
- 1.1.2 display link-aggregation interface
- 1.1.3 display link-aggregation summary
- 1.1.4 display link-aggregation verbose
- 1.1.5 lacp enable
- 1.1.6 lacp port-priority
- 1.1.7 lacp system-priority
- 1.1.8 link-aggregation
- 1.1.9 link-aggregation group description
- 1.1.10 link-aggregation group mode
- 1.1.11 port link-aggregation group
- 1.1.12 reset lacp statistics
- 1.1 Link Aggregation Configuration Commands
- Chapter 1 Link Aggregation Configuration Commands
- 11-Port Isolation Commands.pdf
- 12-Port Binding Commands.pdf
- 13-DLDP Commands.pdf
- 14-MAC Address Table Commands.pdf
- 15-MSTP Commands.pdf
- Chapter 1 MSTP Configuration Commands
- 1.1 MSTP Configuration Commands
- 1.1.1 active region-configuration
- 1.1.2 check region-configuration
- 1.1.3 display stp
- 1.1.4 display stp region-configuration
- 1.1.5 instance
- 1.1.6 region-name
- 1.1.7 reset stp
- 1.1.8 revision-level
- 1.1.9 stp
- 1.1.10 stp bpdu-protection
- 1.1.11 stp bridge-diameter
- 1.1.12 stp config-digest-snooping
- 1.1.13 stp cost
- 1.1.14 stp edged-port
- 1.1.15 stp interface
- 1.1.16 stp interface config-digest-snooping
- 1.1.17 stp interface cost
- 1.1.18 stp interface edged-port
- 1.1.19 stp interface loop-protection
- 1.1.20 stp interface mcheck
- 1.1.21 stp interface no-agreement-check
- 1.1.22 stp interface point-to-point
- 1.1.23 stp interface port priority
- 1.1.24 stp interface root-protection
- 1.1.25 stp interface transmit-limit
- 1.1.26 stp loop-protection
- 1.1.27 stp max-hops
- 1.1.28 stp mcheck
- 1.1.29 stp mode
- 1.1.30 stp no-agreement-check
- 1.1.31 stp pathcost-standard
- 1.1.32 stp point-to-point
- 1.1.33 stp port priority
- 1.1.34 stp priority
- 1.1.35 stp region-configuration
- 1.1.36 stp root primary
- 1.1.37 stp root secondary
- 1.1.38 stp root-protection
- 1.1.39 stp tc-protection
- 1.1.40 stp timer forward-delay
- 1.1.41 stp timer hello
- 1.1.42 stp timer max-age
- 1.1.43 stp timer-factor
- 1.1.44 stp transmit-limit
- 1.1.45 vlan-mapping modulo
- 1.1.46 vlan-vpn tunnel
- 1.1 MSTP Configuration Commands
- Chapter 1 MSTP Configuration Commands
- 16-Routing Protocol Commands.pdf
- Chapter 1 Static Route Configuration Commands
- 1.1 Routing Table Monitoring Commands
- 1.1.1 display ip routing-table
- 1.1.2 display ip routing-table acl
- 1.1.3 display ip routing-table ip-address
- 1.1.4 display ip routing-table ip-address1 ip-address2
- 1.1.5 display ip routing-table ip-prefix
- 1.1.6 display ip routing-table protocol
- 1.1.7 display ip routing-table radix
- 1.1.8 display ip routing-table statistics
- 1.1.9 display ip routing-table verbose
- 1.2 Static Route Configuration Commands
- 1.1 Routing Table Monitoring Commands
- Chapter 2 RIP Configuration Commands
- 2.1 RIP Configuration Commands
- 2.1.1 checkzero
- 2.1.2 default cost
- 2.1.3 display rip
- 2.1.4 display rip routing
- 2.1.5 filter-policy export
- 2.1.6 filter-policy import
- 2.1.7 host-route
- 2.1.8 import-route
- 2.1.9 network
- 2.1.10 peer
- 2.1.11 preference
- 2.1.12 reset
- 2.1.13 rip
- 2.1.14 rip authentication-mode
- 2.1.15 rip input
- 2.1.16 rip metricin
- 2.1.17 rip metricout
- 2.1.18 rip output
- 2.1.19 rip split-horizon
- 2.1.20 rip version
- 2.1.21 rip work
- 2.1.22 summary
- 2.1.23 timers
- 2.1.24 traffic-share-across-interface
- 2.1 RIP Configuration Commands
- Chapter 3 OSPF Configuration Commands
- 3.1 OSPF Configuration Commands
- 3.1.1 abr-summary
- 3.1.2 area
- 3.1.3 asbr-summary
- 3.1.4 authentication-mode
- 3.1.5 default cost
- 3.1.6 default interval
- 3.1.7 default limit
- 3.1.8 default tag
- 3.1.9 default type
- 3.1.10 default-cost
- 3.1.11 default-route-advertise
- 3.1.12 display ospf abr-asbr
- 3.1.13 display ospf asbr-summary
- 3.1.14 display ospf brief
- 3.1.15 display ospf cumulative
- 3.1.16 display ospf error
- 3.1.17 display ospf interface
- 3.1.18 display ospf lsdb
- 3.1.19 display ospf nexthop
- 3.1.20 display ospf peer
- 3.1.21 display ospf request-queue
- 3.1.22 display ospf retrans-queue
- 3.1.23 display ospf routing
- 3.1.24 display ospf vlink
- 3.1.25 filter-policy export
- 3.1.26 filter-policy import
- 3.1.27 import-route
- 3.1.28 network
- 3.1.29 nssa
- 3.1.30 ospf
- 3.1.31 ospf authentication-mode
- 3.1.32 ospf cost
- 3.1.33 ospf dr-priority
- 3.1.34 ospf mib-binding
- 3.1.35 ospf mtu-enable
- 3.1.36 ospf network-type
- 3.1.37 ospf timer dead
- 3.1.38 ospf timer hello
- 3.1.39 ospf timer poll
- 3.1.40 ospf timer retransmit
- 3.1.41 ospf trans-delay
- 3.1.42 peer
- 3.1.43 preference
- 3.1.44 protocol multicast-mac enable
- 3.1.45 reset ospf
- 3.1.46 router id
- 3.1.47 silent-interface
- 3.1.48 snmp-agent trap enable ospf
- 3.1.49 spf-schedule-interval
- 3.1.50 stub
- 3.1.51 vlink-peer
- 3.1 OSPF Configuration Commands
- Chapter 4 Integrated IS-IS Configuration Commands
- 4.1 Integrated IS-IS Configuration Commands
- 4.1.1 area-authentication-mode
- 4.1.2 cost-style
- 4.1.3 default-route-advertise
- 4.1.4 display isis brief
- 4.1.5 display isis interface
- 4.1.6 display isis lsdb
- 4.1.7 display isis mesh-group
- 4.1.8 display isis peer
- 4.1.9 display isis route
- 4.1.10 display isis spf-log
- 4.1.11 domain-authentication-mode
- 4.1.12 filter-policy export
- 4.1.13 filter-policy import
- 4.1.14 ignore-lsp-checksum-error
- 4.1.15 import-route
- 4.1.16 import-route isis level-2 into level-1
- 4.1.17 isis
- 4.1.18 isis authentication-mode
- 4.1.19 isis circuit-level
- 4.1.20 isis cost
- 4.1.21 isis dis-priority
- 4.1.22 isis enable
- 4.1.23 isis mesh-group
- 4.1.24 isis timer csnp
- 4.1.25 isis timer hello
- 4.1.26 isis timer holding-multiplier
- 4.1.27 isis timer lsp
- 4.1.28 isis timer retransmit
- 4.1.29 is-level
- 4.1.30 log-peer-change
- 4.1.31 md5-compatible
- 4.1.32 network-entity
- 4.1.33 preference
- 4.1.34 reset isis all
- 4.1.35 reset isis peer
- 4.1.36 set-overload
- 4.1.37 silent-interface
- 4.1.38 spf-delay-interval
- 4.1.39 spf-slice-size
- 4.1.40 summary
- 4.1.41 timer lsp-max-age
- 4.1.42 timer lsp-refresh
- 4.1.43 timer spf
- 4.1 Integrated IS-IS Configuration Commands
- Chapter 5 BGP Configuration Commands
- 5.1 BGP Configuration Commands
- 5.1.1 aggregate
- 5.1.2 bgp
- 5.1.3 balance
- 5.1.4 compare-different-as-med
- 5.1.5 confederation id
- 5.1.6 confederation nonstandard
- 5.1.7 confederation peer-as
- 5.1.8 dampening
- 5.1.9 default local-preference
- 5.1.10 default med
- 5.1.11 display bgp group
- 5.1.12 display bgp network
- 5.1.13 display bgp paths
- 5.1.14 display bgp peer
- 5.1.15 display bgp routing-table
- 5.1.16 display bgp routing-table as-path-acl
- 5.1.17 display bgp routing-table cidr
- 5.1.18 display bgp routing-table community
- 5.1.19 display bgp routing-table community-list
- 5.1.20 display bgp routing-table dampened
- 5.1.21 display bgp routing-table different-origin-as
- 5.1.22 display bgp routing-table flap-info
- 5.1.23 display bgp routing-table peer
- 5.1.24 display bgp routing-table regular-expression
- 5.1.25 display bgp routing-table statistic
- 5.1.26 filter-policy export
- 5.1.27 filter-policy import
- 5.1.28 group
- 5.1.29 import-route
- 5.1.30 network
- 5.1.31 peer advertise-community
- 5.1.32 peer allow-as-loop
- 5.1.33 peer as-number
- 5.1.34 peer as-path-acl export
- 5.1.35 peer as-path-acl import
- 5.1.36 peer connect-interface
- 5.1.37 peer default-route-advertise
- 5.1.38 peer description
- 5.1.39 peer ebgp-max-hop
- 5.1.40 peer enable
- 5.1.41 peer filter-policy export
- 5.1.42 peer filter-policy import
- 5.1.43 peer group
- 5.1.44 peer ip-prefix export
- 5.1.45 peer ip-prefix import
- 5.1.46 peer next-hop-local
- 5.1.47 peer password
- 5.1.48 peer public-as-only
- 5.1.49 peer reflect-client
- 5.1.50 peer route-policy export
- 5.1.51 peer route-policy import
- 5.1.52 peer route-update-interval
- 5.1.53 peer timer
- 5.1.54 preference
- 5.1.55 reflect between-clients
- 5.1.56 reflector cluster-id
- 5.1.57 refresh bgp
- 5.1.58 reset bgp
- 5.1.59 reset bgp dampening
- 5.1.60 reset bgp flap-info
- 5.1.61 reset bgp group
- 5.1.62 router id
- 5.1.63 summary
- 5.1.64 timer
- 5.1.65 undo synchronization
- 5.1 BGP Configuration Commands
- Chapter 6 IP Routing Policy Configuration Commands
- 6.1 IP Routing Policy Configuration Commands
- 6.1.1 apply as-path
- 6.1.2 apply community
- 6.1.3 apply cost
- 6.1.4 apply cost-type
- 6.1.5 apply ip next-hop
- 6.1.6 apply isis
- 6.1.7 apply local-preference
- 6.1.8 apply origin
- 6.1.9 apply tag
- 6.1.10 display ip ip-prefix
- 6.1.11 display route-policy
- 6.1.12 if-match { acl | ip-prefix }
- 6.1.13 if-match as-path
- 6.1.14 if-match community
- 6.1.15 if-match cost
- 6.1.16 if-match interface
- 6.1.17 if-match ip next-hop
- 6.1.18 if-match tag
- 6.1.19 ip as-path-acl
- 6.1.20 ip community-list
- 6.1.21 ip ip-prefix
- 6.1.22 route-policy
- 6.1 IP Routing Policy Configuration Commands
- Chapter 7 Route Capacity Configuration Commands
- Chapter 1 Static Route Configuration Commands
- 17-Multicast Commands.pdf
- Chapter 1 GMRP Configuration Commands
- Chapter 2 IGMP Snooping Configuration Commands
- 2.1 IGMP Snooping Configuration Commands
- 2.1.1 display igmp-snooping configuration
- 2.1.2 display igmp-snooping group
- 2.1.3 display igmp-snooping statistics
- 2.1.4 display multicast-vlan
- 2.1.5 igmp-snooping
- 2.1.6 igmp-snooping fast-leave
- 2.1.7 igmp-snooping group-limit
- 2.1.8 igmp-snooping group-policy
- 2.1.9 igmp-snooping host-aging-time
- 2.1.10 igmp-snooping max-response-time
- 2.1.11 igmp-snooping report-aggregation
- 2.1.12 igmp-snooping router-aging-time
- 2.1.13 multicast-vlan enable
- 2.1.14 multicast-vlan subvlan
- 2.1.15 reset igmp-snooping statistics
- 2.1 IGMP Snooping Configuration Commands
- Chapter 3 Common IP Multicast Configuration Commands
- 3.1 Common IP Multicast Configuration Commands
- 3.1.1 display mpm forwarding-table
- 3.1.2 display mpm group
- 3.1.3 display multicast forwarding-table
- 3.1.4 display multicast routing-table
- 3.1.5 display multicast-source-deny
- 3.1.6 multicast route-limit
- 3.1.7 multicast routing-enable
- 3.1.8 multicast static-router-port
- 3.1.9 multicast static-router-port vlan
- 3.1.10 multicast wrongif-holdtime
- 3.1.11 multicast-source-deny
- 3.1.12 reset multicast forwarding-table
- 3.1.13 reset multicast routing-table
- 3.1 Common IP Multicast Configuration Commands
- Chapter 4 Multicast MAC Address Entry Configuration Commands
- Chapter 5 IGMP Configuration Commands
- 5.1 IGMP Configuration Commands
- 5.1.1 display igmp group
- 5.1.2 display igmp interface
- 5.1.3 igmp enable
- 5.1.4 igmp group-limit
- 5.1.5 igmp group-policy
- 5.1.6 igmp group-policy vlan
- 5.1.7 igmp host-join port
- 5.1.8 igmp host-join vlan
- 5.1.9 igmp lastmember-queryinterval
- 5.1.10 igmp max-response-time
- 5.1.11 igmp proxy
- 5.1.12 igmp report-aggregation
- 5.1.13 igmp robust-count
- 5.1.14 igmp timer other-querier-present
- 5.1.15 igmp timer query
- 5.1.16 igmp version
- 5.1.17 reset igmp group
- 5.1 IGMP Configuration Commands
- Chapter 6 PIM Configuration Commands
- 6.1 PIM Configuration Commands
- 6.1.1 bsr-policy
- 6.1.2 c-bsr
- 6.1.3 c-rp
- 6.1.4 crp-policy
- 6.1.5 display pim bsr-info
- 6.1.6 display pim interface
- 6.1.7 display pim neighbor
- 6.1.8 display pim routing-table
- 6.1.9 display pim rp-info
- 6.1.10 pim
- 6.1.11 pim bsr-boundary
- 6.1.12 pim dm
- 6.1.13 pim neighbor-limit
- 6.1.14 pim neighbor-policy
- 6.1.15 pim sm
- 6.1.16 pim timer hello
- 6.1.17 register-policy
- 6.1.18 reset pim neighbor
- 6.1.19 reset pim routing-table
- 6.1.20 source-policy
- 6.1.21 static-rp
- 6.1 PIM Configuration Commands
- 18-802.1x Commands.pdf
- Chapter 1 802.1x Configuration Commands
- 1.1 802.1x Configuration Commands
- 1.1.1 display dot1x
- 1.1.2 dot1x
- 1.1.3 dot1x authentication-method
- 1.1.4 dot1x dhcp-launch
- 1.1.5 dot1x guest-vlan
- 1.1.6 dot1x max-user
- 1.1.7 dot1x port-control
- 1.1.8 dot1x port-method
- 1.1.9 dot1x quiet-period
- 1.1.10 dot1x re-authenticate
- 1.1.11 dot1x retry
- 1.1.12 dot1x retry-version-max
- 1.1.13 dot1x supp-proxy-check
- 1.1.14 dot1x timer
- 1.1.15 dot1x version-check
- 1.1.16 reset dot1x statistics
- 1.1 802.1x Configuration Commands
- Chapter 2 HABP Configuration Commands
- Chapter 1 802.1x Configuration Commands
- 19-AAA-RADIUS-HWTACACS-EAD Commands.pdf
- Chapter 1 AAA & RADIUS & HWTACACS Configuration Commands
- 1.1 AAA Configuration Commands
- 1.1.1 access-limit
- 1.1.2 attribute
- 1.1.3 cut connection
- 1.1.4 display connection
- 1.1.5 display domain
- 1.1.6 display local-user
- 1.1.7 domain
- 1.1.8 idle-cut
- 1.1.9 level
- 1.1.10 local-user
- 1.1.11 local-user password-display-mode
- 1.1.12 messenger
- 1.1.13 name
- 1.1.14 password
- 1.1.15 radius-scheme
- 1.1.16 scheme
- 1.1.17 self-service-url
- 1.1.18 service-type
- 1.1.19 state
- 1.1.20 vlan-assignment-mode
- 1.2 RADIUS Configuration Commands
- 1.2.1 accounting-on enable
- 1.2.2 accounting optional
- 1.2.3 data-flow-format
- 1.2.4 display local-server statistics
- 1.2.5 display radius
- 1.2.6 display radius statistics
- 1.2.7 display stop-accounting-buffer
- 1.2.8 key
- 1.2.9 local-server
- 1.2.10 nas-ip
- 1.2.11 primary accounting
- 1.2.12 primary authentication
- 1.2.13 radius nas-ip
- 1.2.14 radius scheme
- 1.2.15 reset radius statistics
- 1.2.16 reset stop-accounting-buffer
- 1.2.17 retry
- 1.2.18 retry realtime-accounting
- 1.2.19 retry stop-accounting
- 1.2.20 secondary accounting
- 1.2.21 secondary authentication
- 1.2.22 server-type
- 1.2.23 state
- 1.2.24 stop-accounting-buffer enable
- 1.2.25 timer
- 1.2.26 timer quiet
- 1.2.27 timer realtime-accounting
- 1.2.28 timer response-timeout
- 1.2.29 user-name-format
- 1.3 HWTACACS Configuration Commands
- 1.3.1 data-flow-format
- 1.3.2 display hwtacacs
- 1.3.3 display stop-accounting-buffer
- 1.3.4 hwtacacs nas-ip
- 1.3.5 hwtacacs scheme
- 1.3.6 key
- 1.3.7 nas-ip
- 1.3.8 primary accounting
- 1.3.9 primary authentication
- 1.3.10 primary authorization
- 1.3.11 reset hwtacacs statistics
- 1.3.12 reset stop-accounting-buffer
- 1.3.13 retry stop-accounting
- 1.3.14 secondary accounting
- 1.3.15 secondary authentication
- 1.3.16 secondary authorization
- 1.3.17 stop-accounting-buffer enable
- 1.3.18 timer quiet
- 1.3.19 timer realtime-accounting
- 1.3.20 timer response-timeout
- 1.3.21 user-name-format
- 1.1 AAA Configuration Commands
- Chapter 2 EAD Configuration Commands
- Chapter 1 AAA & RADIUS & HWTACACS Configuration Commands
- 20-Traffic Accounting Commands.pdf
- Chapter 1 Traffic Accounting Configuration Commands
- 1.1 Traffic Accounting Configuration Commands
- 1.1.1 accounting enable
- 1.1.2 accounting-mode traffic
- 1.1.3 debugging traffic-accounting event
- 1.1.4 display traffic-accounting accounting-slot
- 1.1.5 display traffic-accounting statistics
- 1.1.6 display traffic-accounting traffic-group
- 1.1.7 network
- 1.1.8 traffic-accounting accounting-slot
- 1.1.9 traffic-accounting traffic-group
- 1.1.10 traffic-group
- 1.1.11 traffic-slot
- 1.1 Traffic Accounting Configuration Commands
- Chapter 1 Traffic Accounting Configuration Commands
- 21-VRRP-HA Commands.pdf
- 22-ARP Commands.pdf
- Chapter 1 ARP Configuration Commands
- 1.1 ARP Configuration Commands
- 1.1.1 arp check enable
- 1.1.2 arp gratuitous-updating enable
- 1.1.3 arp mac-arp-map limit
- 1.1.4 arp max-entry
- 1.1.5 arp max-dynamic-entry
- 1.1.6 arp proxy enable
- 1.1.7 arp proxy source-vlan enable
- 1.1.8 arp source-suppression limit
- 1.1.9 arp static
- 1.1.10 arp timer aging
- 1.1.11 arp timer gratuitous-updating
- 1.1.12 display arp
- 1.1.13 display arp |
- 1.1.14 display arp attack-list
- 1.1.15 display arp entry-limit
- 1.1.16 display arp interface
- 1.1.17 display arp proxy
- 1.1.18 display arp slot
- 1.1.19 display arp source-suppression
- 1.1.20 display arp vlan
- 1.1.21 display arp timer aging
- 1.1.22 gratuitous-arp-learning enable
- 1.1.23 reset arp attack-list
- 1.1.24 reset arp
- 1.1 ARP Configuration Commands
- Chapter 1 ARP Configuration Commands
- 23-DHCP Commands.pdf
- Chapter 1 DHCP Server Configuration Commands
- 1.1 DHCP Server Configuration Commands
- 1.1.1 dhcp enable
- 1.1.2 dhcp select global
- 1.1.3 dhcp select interface
- 1.1.4 dhcp server detect
- 1.1.5 dhcp server dns-list
- 1.1.6 dhcp server domain-name
- 1.1.7 dhcp server expired
- 1.1.8 dhcp server forbidden-ip
- 1.1.9 dhcp server ip-pool
- 1.1.10 dhcp server nbns-list
- 1.1.11 dhcp server netbios-type
- 1.1.12 dhcp server option
- 1.1.13 dhcp server ping
- 1.1.14 dhcp server static-bind
- 1.1.15 display dhcp server conflict
- 1.1.16 display dhcp server expired
- 1.1.17 display dhcp server free-ip
- 1.1.18 display dhcp server ip-in-use
- 1.1.19 display dhcp server statistics
- 1.1.20 display dhcp server tree
- 1.1.21 dns-list
- 1.1.22 domain-name
- 1.1.23 expired
- 1.1.24 gateway-list
- 1.1.25 nbns-list
- 1.1.26 netbios-type
- 1.1.27 network
- 1.1.28 option
- 1.1.29 reset dhcp server conflict
- 1.1.30 reset dhcp server ip-in-use
- 1.1.31 reset dhcp server statistics
- 1.1.32 static-bind ip-address
- 1.1.33 static-bind mac-address
- 1.1 DHCP Server Configuration Commands
- Chapter 2 DHCP Relay Agent Configuration Commands
- 2.1 DHCP Relay Agent Configuration Commands
- 2.1.1 address-check
- 2.1.2 address-check dhcp-relay
- 2.1.3 address-check no-matched
- 2.1.4 dhcp relay information enable
- 2.1.5 dhcp relay information strategy
- 2.1.6 dhcp-security static
- 2.1.7 dhcp-server
- 2.1.8 dhcp-server ip
- 2.1.9 display dhcp-security
- 2.1.10 display dhcp-server
- 2.1.11 display dhcp-server interface
- 2.1.12 reset dhcp-server
- 2.1 DHCP Relay Agent Configuration Commands
- Chapter 3 DHCP Snooping Configuration Commands
- Chapter 1 DHCP Server Configuration Commands
- 24-ACL Commands.pdf
- Chapter 1 ACL Commands
- 1.1 ACL Configuration Commands
- 1.1.1 acl
- 1.1.2 acl mode
- 1.1.3 acl order
- 1.1.4 display acl config
- 1.1.5 display acl config statistics
- 1.1.6 display acl mode
- 1.1.7 display acl order
- 1.1.8 display acl remaining entry
- 1.1.9 display acl running-packet-filter
- 1.1.10 display time-range
- 1.1.11 packet-filter
- 1.1.12 reset acl counter
- 1.1.13 rule (Basic ACL)
- 1.1.14 rule (Advanced ACL)
- 1.1.15 rule (Layer 2 ACL)
- 1.1.16 rule (user-defined ACL)
- 1.1.17 time-range
- 1.1 ACL Configuration Commands
- Chapter 1 ACL Commands
- 25-QoS Commands.pdf
- Chapter 1 QoS Commands
- 1.1 QoS Commands
- 1.1.1 display priority-trust
- 1.1.2 display qos cos-local-precedence-map
- 1.1.3 display qos-interface all
- 1.1.4 display qos-interface line-rate
- 1.1.5 display qos-interface queue-scheduler
- 1.1.6 display qos-interface traffic-bandwidth
- 1.1.7 display qos-interface traffic-limit
- 1.1.8 display qos-interface traffic-priority
- 1.1.9 display qos-interface traffic-red
- 1.1.10 display qos-interface traffic-redirect
- 1.1.11 display qos-interface traffic-remark-vlanid
- 1.1.12 display qos-interface traffic-statistic
- 1.1.13 inboundcar
- 1.1.14 line-rate
- 1.1.15 priority
- 1.1.16 priority trust
- 1.1.17 qos
- 1.1.18 qos cos-local-precedence-map
- 1.1.19 queue-scheduler
- 1.1.20 reset traffic-statistic
- 1.1.21 traffic-bandwidth
- 1.1.22 traffic-limit
- 1.1.23 traffic-priority
- 1.1.24 traffic-red
- 1.1.25 traffic-redirect
- 1.1.26 traffic-remark-vlanid
- 1.1.27 traffic-statistic
- 1.1 QoS Commands
- Chapter 1 QoS Commands
- 26-Mirroring Commands.pdf
- Chapter 1 Mirroring Commands
- 1.1 Mirroring Commands
- 1.1.1 display mirroring-group
- 1.1.2 display qos-interface mirrored-to
- 1.1.3 mirrored-to
- 1.1.4 mirroring-group
- 1.1.5 mirroring-group (only for Recovery)
- 1.1.6 mirroring-group mirroring-port
- 1.1.7 mirroring-group monitor-port
- 1.1.8 mirroring-group reflector-port
- 1.1.9 mirroring-group remote-probe vlan
- 1.1.10 remote-probe vlan
- 1.1 Mirroring Commands
- Chapter 1 Mirroring Commands
- 27-Cluster Commands.pdf
- Chapter 1 Cluster Configuration Commands
- 1.1 NDP Configuration Commands
- 1.2 NTDP Configuration Commands
- 1.3 Cluster Configuration Commands
- 1.3.1 add-member
- 1.3.2 administrator-address
- 1.3.3 auto-build
- 1.3.4 build
- 1.3.5 cluster
- 1.3.6 cluster enable
- 1.3.7 cluster switch-to
- 1.3.8 delete-member
- 1.3.9 display cluster
- 1.3.10 display cluster candidates
- 1.3.11 display cluster members
- 1.3.12 ftp cluster
- 1.3.13 ftp-server
- 1.3.14 holdtime
- 1.3.15 ip address
- 1.3.16 ip-pool
- 1.3.17 logging-host
- 1.3.18 reboot member
- 1.3.19 snmp-host
- 1.3.20 tftp get
- 1.3.21 tftp put
- 1.3.22 tftp-server
- 1.3.23 timer
- Chapter 1 Cluster Configuration Commands
- 28-PoE Commands.pdf
- Chapter 1 PoE Configuration Commands
- 1.1 PoE Configuration Commands
- 1.1.1 display poe interface
- 1.1.2 display poe interface power
- 1.1.3 display poe powersupply
- 1.1.4 display poe pse
- 1.1.5 poe enable
- 1.1.6 poe enable slot
- 1.1.7 poe legacy enable slot
- 1.1.8 poe max-power
- 1.1.9 poe max-power slot
- 1.1.10 poe mode
- 1.1.11 poe power max-value
- 1.1.12 poe power-management
- 1.1.13 poe priority
- 1.1.14 poe upgrade
- 1.1 PoE Configuration Commands
- Chapter 2 PoE PSU Supervision Configuration Commands
- Chapter 1 PoE Configuration Commands
- 29-UDP-Helper Commands.pdf
- 30-SNMP-RMON Commands.pdf
- Chapter 1 SNMP Configuration Commands
- 1.1 SNMP Configuration Commands
- 1.1.1 display snmp-agent
- 1.1.2 display snmp-agent community
- 1.1.3 display snmp-agent group
- 1.1.4 display snmp-agent mib-view
- 1.1.5 display snmp-agent statistics
- 1.1.6 display snmp-agent sys-info
- 1.1.7 display snmp-agent usm-user
- 1.1.8 enable snmp trap updown
- 1.1.9 snmp-agent
- 1.1.10 snmp-agent community
- 1.1.11 snmp-agent group
- 1.1.12 snmp-agent local-engineid
- 1.1.13 snmp-agent mib-view
- 1.1.14 snmp-agent packet max-size
- 1.1.15 snmp-agent sys-info
- 1.1.16 snmp-agent target-host
- 1.1.17 snmp-agent trap enable
- 1.1.18 snmp-agent trap life
- 1.1.19 snmp-agent trap queue-size
- 1.1.20 snmp-agent trap source
- 1.1.21 snmp-agent usm-user
- 1.1 SNMP Configuration Commands
- Chapter 2 RMON Configuration Commands
- Chapter 1 SNMP Configuration Commands
- 31-NTP Commands.pdf
- Chapter 1 NTP Configuration Commands
- 1.1 NTP Configuration Commands
- 1.1.1 display ntp-service sessions
- 1.1.2 display ntp-service status
- 1.1.3 display ntp-service trace
- 1.1.4 ntp-service access
- 1.1.5 ntp-service authentication enable
- 1.1.6 ntp-service authentication-keyid
- 1.1.7 ntp-service broadcast-client
- 1.1.8 ntp-service broadcast-server
- 1.1.9 ntp-service disable
- 1.1.10 ntp-service in-interface disable
- 1.1.11 ntp-service max-dynamic-sessions
- 1.1.12 ntp-service multicast-client
- 1.1.13 ntp-service multicast-server
- 1.1.14 ntp-service refclock-master
- 1.1.15 ntp-service reliable authentication-keyid
- 1.1.16 ntp-service source-interface
- 1.1.17 ntp-service unicast-peer
- 1.1.18 ntp-service unicast-server
- 1.1 NTP Configuration Commands
- Chapter 1 NTP Configuration Commands
- 32-SSH Terminal Service Commands.pdf
- Chapter 1 SSH Terminal Service Configuration Commands
- 1.1 SSH Server Configuration Commands
- 1.1.1 display rsa local-key-pair public
- 1.1.2 display rsa peer-public-key
- 1.1.3 display ssh server
- 1.1.4 display ssh user-information
- 1.1.5 peer-public-key end
- 1.1.6 protocol inbound
- 1.1.7 public-key-code begin
- 1.1.8 public-key-code end
- 1.1.9 rsa local-key-pair create
- 1.1.10 rsa local-key-pair destroy
- 1.1.11 rsa peer-public-key
- 1.1.12 ssh authentication-type default
- 1.1.13 ssh server authentication-retries
- 1.1.14 ssh server compatible-ssh1x enable
- 1.1.15 ssh server rekey-interval
- 1.1.16 ssh server timeout
- 1.1.17 ssh user
- 1.1.18 ssh user assign rsa-key
- 1.1.19 ssh user authentication-type
- 1.2 SSH Client Configuration Commands
- 1.3 SFTP Server Configuration Commands
- 1.4 SFTP Client Configuration Commands
- 1.1 SSH Server Configuration Commands
- Chapter 1 SSH Terminal Service Configuration Commands
- 33-File System Management Commands.pdf
- 34-FTP and TFTP Commands.pdf
- 35-Information Center Commands.pdf
- Chapter 1 Information Center Commands
- 1.1 Information Center Commands
- 1.1.1 display channel
- 1.1.2 display info-center
- 1.1.3 display logbuffer
- 1.1.4 display logbuffer summary
- 1.1.5 display trapbuffer
- 1.1.6 info-center channel
- 1.1.7 info-center console channel
- 1.1.8 info-center enable
- 1.1.9 info-center logbuffer
- 1.1.10 info-center loghost
- 1.1.11 info-center loghost source
- 1.1.12 info-center monitor channel
- 1.1.13 info-center snmp channel
- 1.1.14 info-center source
- 1.1.15 info-center timestamp
- 1.1.16 info-center trapbuffer
- 1.1.17 reset logbuffer
- 1.1.18 reset trapbuffer
- 1.1.19 terminal debugging
- 1.1.20 terminal logging
- 1.1.21 terminal monitor
- 1.1.22 terminal trapping
- 1.1 Information Center Commands
- Chapter 1 Information Center Commands
- 36-DNS Commands.pdf
- 37-System Maintenance and Debugging Commands.pdf
- Chapter 1 Basic System Configuration and Debugging Commands
- Chapter 2 Network Connectivity Test Commands
- Chapter 3 Device Management Commands
- 3.1 Device Management Commands
- 3.1.1 boot boot-loader
- 3.1.2 boot bootrom
- 3.1.3 boot bootrom default
- 3.1.4 bootrom-update security-check enable
- 3.1.5 display boot-loader
- 3.1.6 display cpu
- 3.1.7 display device
- 3.1.8 display environment
- 3.1.9 display fan
- 3.1.10 display memory
- 3.1.11 display power
- 3.1.12 display schedule reboot
- 3.1.13 display uplink monitor
- 3.1.14 loadsharing enable
- 3.1.15 pause-protection
- 3.1.16 qe monitor
- 3.1.17 qe monitor errpkt
- 3.1.18 qe monitor errpkt check-time
- 3.1.19 qe monitor overflow-threshold
- 3.1.20 rdram
- 3.1.21 reboot
- 3.1.22 schedule reboot at
- 3.1.23 schedule reboot delay
- 3.1.24 temperature-limit
- 3.1.25 uplink monitor
- 3.1 Device Management Commands
- 38-HWPing Commands.pdf
- 39-RRPP Commands.pdf
- 40-NAT-Netstream-Policy Routing Commands.pdf
- Chapter 1 NAT Configuration Commands
- 1.1 NAT Configuration Commands
- 1.1.1 display nat address-group
- 1.1.2 display nat aging-time
- 1.1.3 display nat all
- 1.1.4 display nat blacklist
- 1.1.5 display nat outbound
- 1.1.6 display nat server
- 1.1.7 display nat statistics
- 1.1.8 nat address-group
- 1.1.9 nat aging-time
- 1.1.10 nat blacklist start
- 1.1.11 nat blacklist mode
- 1.1.12 nat blacklist limit amount
- 1.1.13 nat blacklist limit rate
- 1.1.14 nat blacklist limit rate source
- 1.1.15 nat outbound
- 1.1.16 nat server
- 1.1.17 reset nat
- 1.1.18 nat ftp server
- 1.2 NAT Security Logging Configuration Commands
- 1.1 NAT Configuration Commands
- Chapter 2 Netstream Configuration Commands
- 2.1 Netstream Configuration Commands
- 2.1.1 display ip netstream cache
- 2.1.2 display ip netstream export
- 2.1.3 enable
- 2.1.4 ip netstream aggregation
- 2.1.5 ip netstream export dscp
- 2.1.6 ip netstream export host
- 2.1.7 ip netstream export source
- 2.1.8 ip netstream export version
- 2.1.9 ip netstream inbound source
- 2.1.10 ip netstream outbound source
- 2.1.11 ip netstream template refresh
- 2.1.12 ip netstream template timeout
- 2.1.13 ip netstream timeout active
- 2.1.14 ip netstream timeout inactive
- 2.1.15 reset ip netstream statistics
- 2.1 Netstream Configuration Commands
- Chapter 3 Policy Routing Configuration Commands
- Chapter 1 NAT Configuration Commands
- 41-Telnet Protection Commands.pdf
- 42-Hardware-Dependent Software Configuration Commands.pdf
- 43-Appendix.pdf
Command Manual – Link Aggregation
H3C S7500 Series Ethernet Switches
Chapter 1 Link Aggregation Configuration
Commands
1-7
Description
Use the lacp port-priority command to set the priority of the current port.
Use the undo lacp port-priority command to restore the default port priority.
Examples
# Set the priority of port Ethernet 2/0/1 to 64.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] lacp port-priority 64
1.1.7 lacp system-priority
Syntax
lacp system-priority system-priority-value
undo lacp system-priority
View
System view
Parameters
system-priority-value: System priority, ranging from 0 to 65,535 and defaulting to
32,768.
Description
Use the lacp system-priority command to set the system priority.
Use the undo lacp system-priority command to restore the default system priority.
Examples
# Set the system priority to 64.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] lacp system-priority 64
1.1.8 link-aggregation
Syntax
link-aggregation interface-type interface-number to interface-type interface-number
[ both ]