H3C S7500 Series Ethernet Switches Command Manual

Command Manual – MSTP
H3C S7500 Series Ethernet Switches Chapter 1
MSTP Configuration Commands
1-7
Examples
# Map VLAN 2 to MSTI 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] stp region-configuration
[H3C-mst-region] instance 1 vlan 2
1.1.6 region-name
Syntax
region-name name
undo region-name
View
MST region view
Parameters
name: MST region name to be set for the switch, a string of 1 to 32 characters.
Description
Use the region-name command to set an MST region name for a switch.
Use the undo region-name command to revert to the default MST region name.
The default MST region name of a switch is its MAC address.
The MST region name, along with the VLAN mapping table and the MSTP revision
level, determines the MST region a switch belongs to.
Related commands: instance, revision-level, check region-configuration,
vlan-mapping modulo, active region-configuration.
Examples
# Set the MST region name of the switch to hello.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] stp region-configuration
[H3C-mst-region] region-name hello
1.1.7 reset stp
Syntax
reset stp [ interface interface-list ]