H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 1 Static Route Configuration Commands
1-13
O_NSSA 0 0 0 0
AGGRE 0 0 0 0
Total 28 5 29 1
Table 1-4 Description on the fields of the display ip routing-table statistics
command
Field Description
Proto
Routing protocol. O_ASE stands for OSPF_ASE routes; O_NSSA stands
for OSPF NSSA routes; AGGRE stands for aggregated routes.
route Number of routes
active Number of active routes
added
Number of routes added after the router is rebooted or the routing table is
cleared last time.
deleted Number of routes deleted (Such routes will be freed in a period of time)
Total Total number of different kinds of routes.
1.1.9 display ip routing-table verbose
Syntax
display ip routing-table verbose
View
Any view
Parameters
None
Description
Use the display ip routing-table verbose command to display the verbose routing
table information.
With the verbose argument provided, this command is used to display the verbose
routing table information. The descriptor describing the route state will be displayed first.
Then, the statistics of the entire routing table will be output. Finally, the verbose
description of each route will be output.
The display ip routing-table verbose command can be executed to display all current
routes, including inactive routes and invalid routes.
Examples
# Display the verbose routing table information.