H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
2-22
2.1.24 traffic-share-across-interface
Syntax
traffic-share-across-interface
undo traffic-share-across-interface
View
RIP view
Parameters
None
Description
Use the traffic-share-across-interface command to enable traffic to be forwarded
along multiple equivalent RIP routes.
Use the undo traffic-share-across-interface command to disable this function.
By default, this function is disabled.
When the number of equivalent routes reaches the upper limit:
If this function is enabled, the newly learned equivalent route replaces the existing
equivalent route in the routing table.
If this function is disabled, the first aged route entry is replaced by the newly learned
route. If no route entry is aged, the newly learned equivalent route will be dropped.
Examples
# Enable traffic to be forwarded along multiple equivalent RIP routes.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] rip
[H3C-rip] traffic-share-across-interface