H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
4-26
4.1.28 isis timer retransmit
Syntax
isis timer retransmit seconds
undo isis timer retransmit
View
Interface view
Parameters
seconds: Interval for retransmitting LSP packets, in seconds, ranging from 1 to 300,
with the default as 5 seconds.
Description
Use the isis timer retransmit command to configure the time interval for retransmitting
LSP packets over a point-to-point link.
Use the undo isis timer retransmit command to resume the default configuration.
You should be careful when configuring this parameter to avoid unnecessary
retransmission.
You need not use this command over a broadcast link, because an LSP packet requires
response from the peer only over a point-to-point link, but not over a broadcast link.
Related commands: isis timer lsp.
Examples
# Configure the time interval as 10 seconds for VLAN-interface 10 to retransmit LSP.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Vlan-interface 10
[H3C-Vlan-interface10] isis timer retransmit 10
4.1.29 is-level
Syntax
is-level { level-1 | level-1-2 | level-2 }
undo is-level
View
IS-IS view