H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-21
Table 5-8 Description on the fields of the display bgp routing-table dampened
command
Field Description
Flags
Status code:
# – valid (valid route)
^ – active (selected optimal route)
I – internal (IBGP route)
D – damped (attenuation dampened)
H – history (history record)
S – aggregate suppressed (aggregation suppressed)
B – balance (load balance)
#D Valid and dampened route
Dest/Mask The route to this network segment is dampened.
Source Next hop of the route
Damping-limit
The time before dampening turns invalid and the route can be
reused.
Origin attribute of a route, which indicates that the route updates
its origin relative to the route originating it from the AS. It has
three optional values:
IGP
The route belongs to inside of AS. BGP treats
aggregate route and the route defined by the command
network as inside of AS, and origin type as IGP.
EGP
The route is learned from exterior gateway protocol
(EGP).
Origin
INC
Short for INCOMPLETE: indicates that the original
source of the route information is unknown (learned by
other methods). BGP sets the origin of the route
imported through other IGP protocols as INCOMPLETE
As-path
AS-path attribute of route, which records all AS areas that the
route passes. With it, route loop can be avoided.
5.1.21 display bgp routing-table different-origin-as
Syntax
display bgp [ multicast ] routing-table different-origin-as
View
Any view