H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-54
Use the undo router id command to cancel the router ID that has been set.
Examples
# Set the router ID to 10.1.1.3.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] router id 10.1.1.3
5.1.63 summary
Syntax
summary
undo summary
View
BGP view
Parameters
None
Description
Use the summary command to configure auto aggregation of sub-network routes.
Use the undo summary command to disable it.
By default, no auto aggregation of sub-network routes is executed.
After the summary command is used, BGP cannot receive the sub-network routes
imported from the IGP, so the amount of the routing information can be reduced.
Examples
# Perform auto aggregation of the sub-network routes.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] bgp 100
[H3C-bgp] summary
5.1.64 timer
Syntax
timer keep-alive keepalive-interval hold holdtime-interval
undo timer