H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 7 Route Capacity Configuration Commands
7-2
Table 7-1 Description on the fields of the display memory command
Field Description
System Total Memory(bytes) Total memory size (in bytes) of the switch
Total Used Memory(bytes) Occupied memory size (in bytes) of the switch
Used Rate Memory occupation rate
7.1.2 display memory limit
Syntax
display memory limit
View
Any view
Parameters
None
Description
Use the display memory limit command to display the memory setting and status
information related to route capacity.
This command displays the current configuration information, free memory, and status
information about connections, such as times of disconnection, times of reconnection,
and whether the current status is emergent.
Examples
# Display the current memory setting and status information.
<H3C> display memory limit
Current memory limit configuration information:
system memory safety: 40 (MBytes)
system memory limit: 30 (MBytes)
auto-establish enabled
Free Memory: 125705152 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal