H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 7 Route Capacity Configuration Commands
7-4
Related commands: memory auto-establish enable, memory { safety | limit },
display memory limit.
Examples
# Disable automatic recovery of the routing protocol connections when the free
memory of the current switch recovers.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] memory auto-establish disable
7.1.4 memory auto-establish enable
Syntax
memory auto-establish enable
View
System view
Parameters
None
Description
Use the memory auto-establish enable command to enable automatic recovery of
routing protocol connections when the free memory of the switch recovers to the
specified value.
By default, when the free memory of a switch recovers to the safety value, connections
of all the routing protocols will always recover (when the free memory of the switch
decreases to a lower limit, the connections will be disconnected forcibly).
You can use the memory auto-establish disable command to disable the automatic
recovery function, and use the memory auto-establish enable command to re-enable
the function.
By default, this function is enabled.
Related commands: memory auto-establish disable, memory { safety | limit },
display memory limit.
Examples
# Enable automatic recovery of the connections of all the routing protocols when the
free memory of the current switch recovers.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] memory auto-establish enable