H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Multicast
H3C S7500 Series Ethernet Switches
Chapter 3 Common IP Multicast Configuration
Commands
3-3
z Address of the IP multicast group
z Member ports in the IP multicast group
z MAC multicast group
z Address of the MAC multicast group
z Member ports in the MAC multicast group
Caution:
z The fields of this command are similar to those of the display igmp group
command, except that the information of the specific ports is added.
z The fields of this command are the same as those of the display igmp-snooping
group command except that the VLANs to be viewed are of different attributes.
z The display igmp-snooping group command displays the information about ports
joining in layer-2 multicast groups in IGMP Snooping-enabled VLANs, while the
display mpm group command displays the information about ports joining in
layer-3 multicast groups in IGMP-enabled VLANs.
Examples
# Display the information about multicast groups in VLAN 2.
<H3C> display mpm group vlan 1200
Total 2 IP Group(s).
Total 2 MAC Group(s).
Vlan(id):1200.
Total 2 IP Group(s).
Total 2 MAC Group(s).
Static router port(s):
Dynamic router port(s):
IP group(s):the following ip group(s) match to one mac group.
IP group address:228.0.0.1
Host port(s):GigabitEthernet2/0/12
MAC group(s):
MAC group address:0100-5e00-0001
Host port(s):GigabitEthernet2/0/12
IP group(s):the following ip group(s) match to one mac group.
IP group address:228.0.0.0
Host port(s):GigabitEthernet2/0/12
MAC group(s):
MAC group address:0100-5e00-0000
Host port(s):GigabitEthernet2/0/12