H3C S7500 Series Ethernet Switches Command Manual

Command Manual – 802.1x
H3C S7500 Series Ethernet Switches Chapter 1
802.1x Configuration Commands
1-4
Field Description
Total current used 802.1x resource
number
The number of online supplicant
systems
GigabitEthernet2/0/1 is link-up
The GigabitEthernet 2/0/1 port is in up
state
802.1X protocol is disabled 802.1x is disabled on the port
Proxy trap checker is disabled
Whether to check a supplicant system
that logs in through the proxy server:
z Disable means the switch does not
detect a supplicant system that logs
in through the proxy server.
z Enable means the switch sends Trap
packets when it detects that a
supplicant system logs in through the
proxy server.
Proxy logoff checker is disabled
Whether to check a supplicant system
that logs in through the proxy server:
z Disable means the switch does not
detect a supplicant system that logs
in through the proxy server.
z Enable means the switch
disconnects a supplicant system
when it detects that the latter logs in
through the proxy server.
Guest Vlan is disabled The Guest VLAN function is disabled
Version-Check is disabled
The client version check function is
disabled
The port is a(n) authenticator The port acts as an authenticator
Authenticate Mode is auto The port access control mode is auto
Port Control Type is Mac-based
The port access control method is
MAC-based. That is, supplicant systems
are authenticated based on their MAC
addresses
Max on-line user number
The maximum number of online users
that the port can accommodate
… Information omitted here
1.1.2 dot1x
Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]