H3C S7500 Series Ethernet Switches Command Manual

Command Manual – 802.1x
H3C S7500 Series Ethernet Switches Chapter 1
802.1x Configuration Commands
1-12
interface-list argument, these commands apply to the specified Ethernet ports. When
being executed in Ethernet port view, these two commands apply to the current
Ethernet port only. In this case, the interface-list argument is not needed.
Related commands: display dot1x.
Examples
# Specify to implement port-based authentication on the supplicant systems connected
to Ethernet 3/0/1.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] dot1x port-method portbased interface Ethernet 3/0/1
1.1.9 dot1x quiet-period
Syntax
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameters
None
Description
Use the dot1x quiet-period command to enable the quiet-period timer.
Use the undo dot1x quiet-period command to disable the quiet-period timer.
When a supplicant system fails to pass the authentication, the authenticator system
(such as an H3C Ethernet switch) will stay quiet for a period of time (determined by the
quiet-period timer) before it performs another authentication. During the quiet period,
the authenticator system performs no 802.1x authentication.
By default, the quiet-period timer is disabled.
Related commands: display dot1x, dot1x timer.
Examples
# Enable the quiet-period timer.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] dot1x quiet-period