H3C S7500 Series Ethernet Switches Command Manual

Command Manual – 802.1x
H3C S7500 Series Ethernet Switches Chapter 1
802.1x Configuration Commands
1-14
1.1.11 dot1x retry
Syntax
dot1x retry max-retry-value
undo dot1x retry
View
System view
Parameters
max-retry-value: Maximum number of retry times that a switch will resend the
authentication request packet to a supplicant system. This argument ranges from 1 to
10 and defaults to 2.
Description
Use the dot1x retry command to specify the maximum number of retry times that a
switch will resend authentication request packets to supplicant systems.
Use the undo dot1x retry command to restore the default.
A switch will resend the packet if it still has not received any response from the
supplicant system within a preset period after it sends an authentication request packet
to a supplicant system.
The retry times of 1 means that the switch will send the request packet only once; the
retry times of 2 means that the switch will resend the packet once if no response comes
back, and so on. This command applies to all ports.
Related commands: display dot1x.
Examples
# Specify the maximum number of retry times that the switch will resend the
authentication request packet to be 9.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] dot1x retry 9
1.1.12 dot1x retry-version-max
Syntax
dot1x retry-version-max max-retry-version-value
undo dot1x retry-version-max