H3C S7500 Series Ethernet Switches Command Manual

Command Manual – 802.1x
H3C S7500 Series Ethernet Switches Chapter 1
802.1x Configuration Commands
1-15
View
System view
Parameters
max-retry-version-value: Maximum number of retry times that a switch will resend the
version request packet to a supplicant system. This argument ranges from 1 to 10.
Description
Use the dot1x retry-version-max command to set the maximum number of retry times
that a switch will resend the version request packet to a connected supplicant system.
Use the undo dot1x retry-version-max command to restore the default.
By default, the switch can send a version request packet to a supplicant system up to
three times repeatedly.
A switch will resend the packet if within a preset period (determined by the client version
timer) it still has not received any response from the supplicant system after it sends a
version request packet to a supplicant system. When the number set by this command
has reached and there is still no response from the supplicant system, the switch will
continue its following authentication without sending the version request packet. This
command applies to all ports.
Related commands: display dot1x, dot1x timer.
Examples
# Configure the maximum number of retry times that the switch will resend the version
request packet to be 6.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] dot1x retry-version-max 6
1.1.13 dot1x supp-proxy-check
Syntax
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
View
System view, Ethernet port view
Parameters
logoff: Disconnects the supplicant system if it logs in through the proxy server or
through multiple network cards.