H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-9
Table 1-2 Description on the fields of the display local-user command
Field Description
State State of the local user
ServiceType Mask
Service type mark of local user:
T: Telnet
S: SSH
C: Terminal service
LM: lan-access
F: FTP
None: No service type is set.
Idle Cut State of the idle-cut function
Access-limit Limit on the number of access users
Bind location Whether or not bound to a port
VLAN ID VLAN of the user
IP address IP address of the user
MAC address MAC address of the user
User Privilege User privilege
1.1.7 domain
Syntax
domain { isp-name | default { disable | enable isp-name } }
undo domain isp-name
View
System view
Parameters
isp-name: Name of a ISP domain, a character string of up to than 24 characters. This
string cannot contain the following characters: /:*?<>.
default enable isp-name: Specifies the default ISP domain.
disable: Restores the default ISP domain system.
Description
Use the domain command to create an ISP domain or enter the view of an existing ISP
domain.
Use the undo domain command to delete a specified ISP domain.