H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-16
undo password
View
Local user view
Parameters
simple: Specifies to display the password in plain text.
cipher: Specifies to display the password in cipher text.
password: Password you want to set, a character string.
z For simple mode, the password must be in plain text.
z For cipher mode, the password can be either in cipher text or in plain text,
depending on your input.
A password in plain text can be a string with of up to 16 consecutive characters, for
example, aabbcc918. A password in cipher text must be 24 characters in length, for
example, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Use the password command to set a password for the local user.
Use the undo password command to cancel the password configured.
Note that, after the local-user password-display-mode cipher-force command is
executed, the password will be displayed in cipher text even if you use the password
command to set the password to be displayed in plain text, that is, in the simple mode.
Related commands: display local-user.
Examples
# Set the password of a user named aabbcc to 20030422 and specify to display the
password in plain text.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] local-user aabbcc
[H3C-luser-aabbcc] password simple 20030422
1.1.15 radius-scheme
Syntax
radius-scheme radius-scheme-name
View
ISP domain view