H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-19
Description
Use the self-service-url enable command to enable the self-service server location
function
Use the self-service-url disable command to disable the self-service server location
function
By default, this function is disabled on the switch.
This command must be used with in cooperation with a self-service-supported RADIUS
server (such as CAMS). Through self-service, users can manage and control their
accounts or card numbers by themselves. A server installed with the self-service
software is called a self-service server.
After this command is executed on the switch, users can locate the self-service server
by performing the following steps:
z Choose [change user password] on the 802.1x client.
z The client opens the default browser (for example, IE or Netscape) and locates the
specified URL page used to change user password on the self-service server.
z Then, the user can change the password.
A user can choose the [change user password] option on the client only after passing
the authentication. If the user fails the authentication, this option is grayed out and is
unavailable.
Examples
# Under the default ISP domain system, set the URL of the web page used to modify
user password on the self-service server to http://10.153.89.94/selfservice/modPassw
d1x.jsp|userName.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] domain system
[H3C-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
1.1.18 service-type
Syntax
service-type { ftp [ ftp-directory directory ] | lan-access | { ssh | telnet | terminal }*
[ level level ] }
undo service-type { ftp [ ftp-directory ] | lan-access | { ssh | telnet | terminal }* }
View
Local user view