H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-39
The undo radius scheme command cannot be used to delete the default RADIUS
scheme. Note that you cannot delete a RADIUS scheme which is being used by an
online user.
Related commands: key, retry realtime-accounting, radius-scheme, timer
realtime-accounting, stop-accounting-buffer enable, retry stop-accounting,
server-type, state, user-name-format, retry, display radius, display radius
statistics.
Examples
# Create a RADIUS scheme named radius1 and enter its view.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] radius scheme radius1
[H3C-radius-radius1]
1.2.15 reset radius statistics
Syntax
reset radius statistics
View
User view
Parameters
None
Description
Use the reset radius statistics command to clear the statistics about the RADIUS
protocol.
Related commands: display radius.
Examples
# Clear the statistics about the RADIUS protocol.
<H3C> reset radius statistics
1.2.16 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }