H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-51
Table 1-5 Numbers of users and corresponding recommended intervals
Number of users Real-time accounting interval
1 to 99 3
100 to 499 6
500 to 999 12
ú
1000
ú
15
Related commands: retry realtime-accounting, radius scheme.
Examples
# Set the real-time accounting interval of the RADIUS scheme radius1 to 51 minutes.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] radius scheme radius1
[H3C-radius-radius1] timer realtime-accounting 51
1.2.28 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameters
seconds: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds. By default, the response timeout time of the RADIUS server is three seconds.
Description
Use the timer response-timeout command to set the response timeout time of
RADIUS servers.
Use the undo timer response-timeout command to restore the default response
timeout timer of RADIUS servers.
Note that:
z If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request) and
waiting for a time, it should retransmit the packet to ensure that the user can obtain
the RADIUS service. This wait time is called response timeout time of RADIUS