H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-56
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Displays information on buffered
stop-accounting requests according to the HWTACACS scheme specified by
hwtacacs-scheme-name, the name of HWTACACS scheme, a character string of up to
32 characters.
session-id session-id: Displays information on buffered stop-accounting requests
according to the session ID specified by session-id, a character string of up to 50
characters.
time-range start-time stop-time: Displays information on buffered stop-accounting
requests according to the request time, where, start-time is the start time of the
stop-accounting request; stop-time is the end time of stop-accounting request. This
argument is in the format hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd and is used
to display the buffered stop-accounting requests from the start time to the end time.
user-name user-name: Displays information on buffered stop-accounting requests
according to the user name specified by user-name, a character string of up to 32
characters.
Description
Use the display stop-accounting-buffer command to display information on the
stop-accounting requests buffered in the switch.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable,
retry stop-accounting.
Examples
# Display the stop-accounting requests buffered in the HWTACACS scheme abc.
<H3C> display stop-accounting-buffer hwtacacs-scheme abc
1.3.4 hwtacacs nas-ip
Syntax
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip
View
System view
Parameters
ip-address: Specifies a source IP address for the switch, which cannot be an all-zero
address, class D address, class A, B, and C broadcast address, or 127 network
segment address.