H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-63
all: Clears all statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS protocol statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS protocol statistics.
<H3C> reset hwtacacs statistics all
1.3.12 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { hwtacacs-scheme hwtacacs-scheme-name |
session-id session-id | time-range start-time stop-time | user-name user-name }
View
User view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Configures to delete the stop-accounting
requests from the buffer according to the specified HWTACACS scheme name. The
hwtacacs-scheme-name specifies the HWTACACS scheme name with a character
string of up to 32 characters, excluding question marks (?).
session-id session-id: Displays information on buffered stop-accounting requests
according to the session ID specified by session-id, a character string of up to 50
characters.
time-range start-time stop-time: Displays information on buffered stop-accounting
requests according to the request time, where, start-time is the start time of the
stop-accounting request; stop-time is the end time of stop-accounting request. This
argument is in the format hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd and is used
to display the buffered stop-accounting requests from the start time to the end time.
With this argument specified, this command displays the buffered stop-accounting
requests from the start time to the end time.
user-name user-name: Displays information on buffered stop-accounting requests
according to the user name specified by user-name, a character string of up to 32
characters.
Description
Use the reset stop-accounting-buffer command to clear the stop-accounting
requests that have no response and are buffered on the switch.