H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-69
Description
Use the timer quiet command to set the duration that a primary server must wait
before it can resume the active state.
Use the undo timer quiet command to restore the default (five minutes).
With the timer quiet command configured, the switch stops processing the request
packets from users when the communication between the switch and the server is
interrupted. The switch does not send user request packets to the server until the wait
time of the switch is equal to or greater than the time configured with the timer quiet
command.
Related commands: display hwtacacs.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] hwtacacs scheme test1
[H3C-hwtacacs-test1] timer quiet 10
1.3.19 timer realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Parameters
minutes: Real-time accounting interval, which is a multiple of 3 in the range 3 to 60
minutes. By default, the real-time accounting interval is 12 minutes.
Description
Use the timer realtime-accounting command to configure a real-time accounting
interval.
Use the undo timer realtime-accounting command to restore the default interval.
Note that:
z Real-time accounting interval is necessary for real-time accounting. After an
interval value is set, the switch transmits the accounting information of online
users to the TACACS accounting server at intervals of this value.