H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-70
z The setting of real-time accounting interval depends somewhat on the
performance of the switch and the TACACS server: A shorter interval requires
higher device performance. You are therefore recommended to adopt a longer
interval when there are a large number of users (more than 1000, inclusive).
Table
1-6 recommends the real-time accounting intervals for different numbers of users.
Table 1-6 Recommended intervals for different numbers of users
Number of users Real-time accounting interval (minute)
1 to 99 3
100 to 499 6
500 to 999 12
ú
1000
ú
15
Examples
# Set the real-time accounting interval in the HWTACACS scheme test1 to 51 minutes.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] hwtacacs scheme test1
[H3C-hwtacacs-test11] timer realtime-accounting 51
1.3.20 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Parameters
seconds: Length of the response timer in seconds. It ranges from 1 to 300 and defaults
to 5.
Description
Use the timer response-timeout command to set the response timeout timer of the
TACACS server.
Use the undo timer response-timeout command to restore the default (five seconds).