H3C S7500 Series Ethernet Switches Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-71
 Note:
As the HWTACACS is based on TCP, either the server response timeout and/or the
TCP timeout may cause disconnection to the TACACS server.
Related commands: display hwtacacs.
Examples
# Set the response timeout time of the TACACS server to 30 seconds.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] hwtacacs scheme test1
[H3C-hwtacacs-test1] timer response-timeout 30
1.3.21 user-name-format
Syntax
user-name-format { with-domain | without-domain }
View
HWTACACS scheme view
Parameters
with-domain: Specifies to send the username with a domain name to the TACACS
server.
without-domain: Specifies to send the username without any domain name to the
TACACS server.
Description
Use the user-name-format command to configure the username format sent to the
TACACS server.
By default, an HWTACACS scheme acknowledges that the username sent to it
includes an ISP domain name.
Note that:
z The supplicants are generally named in userid@isp-name format. The part
following the @ sign is the ISP domain name, according to which the switch
assigns a user to the corresponding ISP domain. However, some earlier TACACS
servers reject the user name including an ISP domain name. In this case, the user
name is sent to the TACACS server after its domain name is removed. Accordingly,