H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Traffic Accounting
H3C S7500 Series Ethernet Switches Chapter 1
Traffic Accounting Configuration Commands
1-3
Use the undo debugging traffic-accounting event command to turn off debugging
for traffic accounting.
By default, debugging is turned off for traffic accounting.
Examples
# Turn on debugging for traffic accounting.
<H3C> debugging traffic-accounting event
1.1.4 display traffic-accounting accounting-slot
Syntax
display traffic-accounting accounting-slot [ slot-num ]
View
Any view
Parameters
slot-num: Traffic accounting slot.
Description
Use the display traffic-accounting-slot command to display the configuration
information of the traffic accounting slots.
If you specify the slot-num argument, the command is executed to display the
configuration information of the specified traffic accounting slot. Otherwise, the
command is executed to display the configuration information of all traffic accounting
slots.
 Note:
At present, the system supports only one traffic accounting slot. Therefore the same
configuration information is displayed regardless of whether you specify the traffic
accounting slot.
Examples
# Display the configuration information of traffic accounting slot 3.
<H3C> display traffic-accounting accounting-slot 3
Accounting slot number : 2
traffic-slot 3
traffic accounting is enabled