H3C S7500 Series Ethernet Switches Command Manual

Command Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluster Configuration Commands
1-7
topology-collection request to be forwarded through a port, and the time cost during the
last topology collection.
Examples
# Display the global NTDP information.
<aaa_0.H3C> display ntdp
NTDP is running.
Hops : 3
Timer : 0 min
Hop Delay : 200 ms
Port Delay: 20 ms
Last collection total time: 0ms
Table 1-2 Description on the fields of the display ntdp command
Field Description
NTDP is running. NTDP is enabled globally on the local device.
Hops Hop count for topology collection
Timer Interval to collect topology information
Hop Delay
Delay time for the device to forward topology collection
requests
Port Delay
Delay time for a topology-collection request to be
forwarded through a port
Last collection total time Time cost during the last collection
1.2.2 display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed device information.
Description
Use the display ntdp device-list command to display the device information collected
through NTDP.