H3C S7500 Series Ethernet Switches Command Manual

Command Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches Chapter 2
RMON Configuration Commands
2-3
Event table 1 owned by abc is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 2-2 Description on the fields of the display rmon event command
Field Description
Event table Event entries
abc Entry owner
VALID
The entry corresponding to the index is
valid
Description Event description
Will cause log-trap when triggered
The event triggers logs logging and trap
alarms
last triggered at 0days 00h:02m:27s Time the latest event is triggered
2.1.3 display rmon eventlog
Syntax
display rmon eventlog [event-entry ]
View
Any view
Parameters
event-entry: Event entry index, in the range of 1 to 65535. If you do not specify this
argument, the log of all the event entries is displayed.
Description
Use the display rmon eventlog command to display the log of a specified event entry
or all the event entries.
The displayed RMON event log information includes: the indexes and status of the
event entries in the event table, the time (in seconds) when an event log is generated
(in terms of the time elapsed since the system is started or initialized), and the event
description.
Examples
# Display the log generated by the event entry numbered 1.
<H3C> display rmon eventlog 1
Event table 1 owned by abc is VALID.