H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 5 System Commissioning
5-5
Figure 5-6 Set the terminal emulation
5.2 Power-on Startup
5.2.1 Check before Power-on
Before powering on the switch, make sure that:
z The switch is mounted steadily.
z All boards are correctly installed.
z All communication cables, fibers, power cables, and grounding cables are
correctly connected.
z The power outlet voltage is the same as the one indicated on the switch label.
z The console cable is correctly connected, the PC or terminal for configuration is
started, and the terminal parameter settings are completed.