H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 6 Hardware Maintenance
6-10
z More memory space is needed when the size of the routing table maintained by
the switch is too large.
Caution:
z Do not directly touch the components on the surface of the memory module with
naked hands. You are allowed to hold only the non-conductive edges of the memory
module. The memory module is sensitive to ESD. Improper operations may damage
the memory module.
z Normally, you need to take some efforts to remove a memory module. Rough
handling, however, is discouraged.
6.7.2 Structure of a Memory Module
Figure 6-7 Structure of a memory module
6.7.3 Position of a Memory Module on a Board
Figure 6-8 Position of a memory module on a board