H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 7 Software Maintenance
7-3
Press Ctrl+B and the system displays the following:
Password :
 Note:
To enter the Boot Menu, press Ctrl+B within 5 seconds after “Press Ctrl+B to enter
Boot Menu...” is prompted. Otherwise, the system will start executing the program
decompression, and in this case, if you want to enter the Boot Menu, you will have to
reboot the switch. If the system enters the program decompression process, you will
have to wait a long time for the system to get ready, for the program file is rather big in
size and many commands need to be registered.
Enter the correct Boot ROM password.
By default, no Boot ROM password is set for the switch and you can press Enter to
enter the Boot Menu.
Caution:
If you want to modify the Boot ROM password, keep in mind the modified one.
BOOT MENU
1: Download application file to flash
2: Select application file to boot
3: Display all files in flash
4: Delete file from flash
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):
Now, you can press Ctrl +U and Enter to enter the BootROM update menu:
SRPG bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):