H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix A B68-22 Cabinet Installation
A-33
(1) Anchor strip retaining nut (2) Cabinet foot (3) Anchor strip
Figure A-36 Install anchor strips
III. Installing insulating parts and fixing the anchor strips
Follow these steps to install insulating parts and fix an anchor strip:
1) Put the insulating washers under the anchor strip and align them vertically with the
T-shape nuts in the upper troughs of the anchor strip (one anchor strip needs two
insulating washers).
2) Screw M12 × 35 bolts into the holes through the anchor strip. Before that, you
must install other accessories such as insulation washers and big flat washers as
shown in area A in
Figure A-37.
3) Torque the bolts to 45 Nm.