H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-15
(1) Welded nut on the foot holder (2) Nut for fastening the cabinet
Figure B-14 Fasten feet
III. Fixing the cabinets
Caution:
When combining two or more cabinets, you have to combine the cabinets first, and then
fix anchor strips.
1) Install anchor plates.
Loosen the nuts used for fastening the cabinet and turn them upward by more than 10
mm (0.4 in.), and then install anchor plates according to the direction indicated by the
arrow, as shown in
Figure B-15. The anchor plates must press the cabinet feet. One
cabinet needs four anchor plates.