H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-17
(1) Bolt M12×70 (2) Spring washer 12 (3) Big flat washer 12 (4) Insulation washer
(5) Insulation pad of the anchor plate (6) Expansion tube (7) Expansion bolt
(8) Nut for fastening the anchor plate (9) Anchor plate
Figure B-16 Fix the anchor plate
3) Fix the nuts for fastening anchor plates.
Fix the nuts for fastening anchor plates, as shown in area B in
Figure B-16.
4) Fix cabinet tops when combining cabinets.
If you need to combine two or more cabinets together, related connections need to be
performed. Combine the cabinets with connecting plates on the top of the cabinets.
 Note:
If the side panels have been installed, remove the side panels as required before
combining the cabinets.
The connecting plates are installed on the top of the cabinets and delivered together
with the cabinets, as shown in
Figure B-17.