H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-35
Figure B-33 Side holder
z Holder fixing pieces are installed under guide rails. They are used to connect
guide rails and front/back holders, as shown in
Figure B-34.
Figure B-34 Holder fixing piece
z Guide rails are used to connect cabinets and supports.
Guide rails allow you to move the device to an appropriate position easily. In addition,
they can join multiple racks and cabinets together, make connections stronger and
keep the cabinets horizontal. The guide rails also act as a shockproof mechanism for
the equipment.
Figure B-35 shows the profile of the guide rail.