H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-36
50
37
480
1
2
(1) Holes used to connect with supports (2) Holes used to connect with cabinets
Figure B-35 Dimensions of the guide rail
III. Quantity of supports and guide rails
2 × N supports are used to install N cabinets, that is, one N68-22 cabinet uses two
supports. N cabinets in one row need 2N supports.
Each cabinet uses a set of components. The components are delivered together with
supports. Each set of components consist of two guide rails, two slider holders, two
holder fixing pieces, one front holder, and one back holder.
Each cabinet needs two holder fixing pieces, one front holder, and one back holder.
Each row of cabinet needs two side holders. When there is only one cabinet in a row,
the cabinet also needs two side holders.
B.3.2 Installation Procedure
Figure B-36 shows the procedure for installing cabinets on antistatic floor.