H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-43
2
1
2
(1) Height-retaining bolt (both sides) (2) Height-retaining bolt (middle)
Figure B-41 Fix a rack onto the floor
III. Assembling supports and guide rails
Table B-9 Assemble supports and guide rails
Step Operation
1
Assemble supports and guide rails with M12 x 30 bolts,
spring washers, and flat washers, as shown in
Figure B-42.
2
Adjust supports so that two diagonals A and B (see
Figure
B-42) are equal.
3 Fasten the bolts with a torque wrench.