H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-45
1
2
3
4
5
(1) Bolt M12x60 (2) Spring washer 12 (3) Flat washer 12
(4) Expansion tube (5) Expansion nut
Figure B-43 Assemble supports and guide rails
In case of combining a row of cabinets, you must adjust the positions of the supports
before fixing them. The front ends of the supports should be in the same line. The
spacing between adjacent supports should be 128 mm (5.0 in.), as shown in
Figure B-44.
1
2
8
Figure B-44 Position relationship of the supports