H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-59
Table B-15 Install a front/back door
Step Operation
1
Hold the door so that the cross-pin on the rack is in line with the
hole at the lower right side of the door and then put the lower part
of the left side also in position.
2
Pull down the triangular hook pin of the upper part of the door.
Align the hole on the door with the hole on the top of the rack.
3
Release the hook pin so that with the elastic force the hook pin
locks into the hole and fastens the door onto the cabinet.
A
A
1
2
(1) A: Hold the door so that the cross-pin on the rack is in line with the hole at the lower right
side of the door and then put the lower part of the left side also in position.
(2) Pull down the triangular hook pin of the upper part of the door. Align the hole on the door
with the hole on the top of the rack. Release the hook pin so that the hook pin locks into the
hole and fastens the door onto the cabinet.
Figure B-56 Install front door and back door