H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-68
(1) Cabling brackets (2) Oval cable opening
Figure B-63 2U cabling frame
 Note:
You can move the positions of the 1U and 2U cabling frames as required. If necessary,
you can also remove the adjacent dummy panel to facilitate cabling.
A 1U rear cable management bracket is installed at the back of the cabinet, used
together with a power socket strip for management of power cables. When using a 1U
rear cable management bracket, put the cables on the cable holding hooks, and bundle
the cables at the proper positions with cable ties.