H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Appendix B N68 Cabinet Installation
B-71
(1) Tapping screw (2) Cable retaining bracket
Figure B-66 Move a cable retaining bracket
To move a cable retaining bracket, remove the tapping screw from the cable retaining
bracket, move the cable retaining bracket to the desired position in the cabinet, and
fasten the cable retaining bracket with the same tapping screw.
II. Introduction to cabling holes
z Cabling holes on the upper enclosure frame
(1) Corner cabling hole (2) Rear cabling hole (3) Middle cabling hole
Figure B-67 Cabling holes on the upper enclosure frame