H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-10
(1) Ethernet port number
(2) 10/100/1000Base-T Ethernet port status
LED (LINK)
(3) 10/100/1000Base-T Ethernet port status
LED (ACT)
(4) Silkscreen of the LPU name
(5) Captive screw (6) LPU edge (purple)
(7) Ejector lever
(8) 10/100/1000Base-T Ethernet port
(Gigabit)
Figure 2-12 Partially amplified view of the LS81GT8UE panel
Each 10/100/1000Base-T Ethernet port has two LEDs.
Table 2-9 LED description of the LS81GT8UE
LED Status Meaning
OFF No link is present.
LINK
ON A link is present.
OFF No data is being transmitted/received.
ACT
Blinking Data is being transmitted/received.
2.5.3 Matching Cable
The ports use category-5 twisted pairs and RJ-45 connectors, with a maximum
transmission distance of 100 m (328.1 ft).