H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-20
Item Specification
Port speed
z 10 Mbps half-duplex/full-duplex
z 100 Mbps half-duplex/full-duplex
z 1000 Mbps half-duplex/full-duplex
z MDI/MDI-X autosensing
Matching cable and maximum
transmission distance
Category-5 twisted pair, with a maximum
transmission distance of 100 m (328.1 ft)
Compliant standard
z IEEE 802.3
z IEEE 802.3u
z IEEE 802.3ab
z IEEE 802.3x
z IEEE 802.1p
z IEEE 802.1D
z IEEE 802.1Q
z IEEE 802.1X
z IEEE 802.1s
z IEEE 802.1w
 Note:
When using the LS81GT48B as an LPU of the S7503/S7506/S7506R, you can only
use it together with a Salience III or Salience III Plus SRPU:
z If you use the LS81GT48B together with a Salience III Plus SRPU, you can insert it
into any LPU slot on the S7503/S7506/S7506R.
z If you use the LS81GT48B together with a Salience III SRPU, you can only insert it
into one of the last two LPU slots on the S7503/S7506/S7506R switch (slot 2 or 3 for
the S7503, slot 5 or 6 for the S7506, and slot 6 or 7 for the S7506R).
2.10.2 Panel and LEDs
Figure 2-26 LS81GT48B panel